In News

For redundant power supply purposes, a very useful accessory is our battery pack, which can be powered by any AC mains, from 100 to 240V, 50 or 60Hz. The battery pack is housed in a sturdy and reliable 19” 1U box, featuring on front panel MAINS and DC LEDs, as well as a useful backlit LCD displaying the output DC voltage, the internal temperature and time. The rear panel features a switch, a VDE socket for mains AC power supply input, two DC 12V outputs and a temperature sensor. This way one Battery Pack can perform as redundant DC power supply for two units. The internal battery pack has a duration of at least 1 hour without AC mains, this way ensuring the operation of DGLink units, avoiding to waste time for firmware, software and setup reloading. A dual port USB charger (2.0A + 1.0A) on the front panel provides power while main power is connected.

  • INPUT
    VOLTAGE RANGE: 100~250VAC
    AC CURRENT: 1.6A/115VAC – 1A/230VAC
    Frequency: 47~63Hz
  • OUTPUT
    VOLTAGE: 12VDC
    MAX RATED CURRENT OUT: 1.7A
  • FRONT PANEL
    Dual port USB charger: 2.0A + 1.0A (provide power only when the main power is connecteed). Digital Clock + voltmeter + thermometer
  • DISPLAY MODE
    Display time only
    Display voltage only
    Display temperature only
    Sequential display (voltage, time and temperature)
  • MODE SETTING
    Briefly press to select the time, display mode, voltage, temperature;
    Keep pressed to show “ALL”, select the time in 5 seconds steps for the sequential display. Press briefly to exit.
  • TIME SETTING
    Press shortly to adjust the time, press briefly again to exit.
Battery pack image
Battery pack front panel diagram
USB socket USB devices battery charger.
Power led Power on indicator
Outlet switch Switch enabling to power off outlets and connected devices
Switch led Outlets activity led
Display setting buttons Enables to modify display settings and set time
Display Enables control of battery tension, rack internal temperature and time
Display button When power is not supplied can temporarily switch the display on
Battery pack rear panel diagram
Input plug Inlet power plug
Input switch Inlet power switch
Fan Grid-protected cooling fan
Temperature sensor Type: 18B20, waterproof, does not require calibration Temperature measurement: from -55 to 125 ° C
Outlet plug Provides a safe 12V power supply for your device
Picture showing different Link products that will be introduced at Prolight+Sound Exhibition